drawing number rev 1501 route 34 south farmingdale, nj 07727 title material fscm finish: all dim's in: inches (mm) 83330 this drawing and the contents herein are confidential and the sole property of dialight. reproduction of this drawing or construction of any parts within this drawing are forbidden without the written consent of dialight. .625 [15,87] max 6.000 # .125 [152,4 # 3,18] typ. .500 # .030 12,7 # 0,76 [ ] 2.055 [ 52,2 ] ref. 1.750 [ 44,45 ] ref. .282 7,16 [ ] .210 [5,33] max .032 [ 0,81 ] scale: 2.000 tolerances: unless otherwise specified fractions: # 1/64 decimals (.xx): # .02 decimals (.xxx): # .010 angles: # 1 $ a 5mm, 24 v, snap-in led pmi c-17913 sheet 1 of 1 family table: - - rev ecn no revisions drn ckd app date a new release ajf klj cjc 4-7-11 dialight part number led color 559-5904-003f yellow 559-6104-003F red 559-6204-003f green absolute maximum ratings at 25 $ c ambient yellow red green units peak pulsed forward current 70 70 100 ma continuous forward current 50 50 30 ma reverse voltage 5 5 5 v operating temperature -30 to +85 $ c storage temperature -40 to +100 $ c operating characteristics at 25 $ c ambient led characteristics color min. typ. max. units test conditions luminous intensity yellow 1600 3100 mcd i f = 20 ma red 1400 2100 green 3000 5000 peak wavelength yellow 592 nm red 635 green 525 forward voltage yellow 2.02 2.4 v i f = 20 ma red 1.9 2.4 green 3.5 4.0 viewing angle yellow 15 degrees red 15 green 30 notes: 1. dialight part numbers: 559-xx04-003f. 2. recommended mounting hole size: 249"- .252" on panels .031"-.062" thick. 3. lead wires: 24 awg pvc 7/32 pre-bonded. 4. pin numbers are for reference only, designation non-existent on part. 5. this assembly contains electrostatic discharge sensitive devices (esds). maintain all precautionary measures during assembly, handling and storage in accordance with ipc-a-610. rohs compliant 559-xx04-003f part numbers with the "f" suffix ending are rohs compliant. packaging is marked with "rohs compliant" label or equivalent markings. 1 2 black wire (cathode) red wire (anode) shrink tubing and resistor housing 5mm led non-tinted, non-diffused dialight 559-xx04 attention: observe precautions for handling electrostatic sensitive devices led schematic pin 1 cathode pin 2
|
